Veteran-Owned & Operated Fully Mobile — St. Augustine, Ponte Vedra, Jacksonville, Palm Coast & Anywhere in Florida
Open 8:00 AM–6:00 PM, 7 Days seacoastdetail@gmail.com
Home All 32 Marine Services
Detailing, Fiberglass & Hull
Mechanical, Steering & Yard
Power, Batteries & Systems
Service Areas (Mobile FL)
About Seacoast FAQ Contact & Quote
Call (904) 815-8421 Text Boat Photos for a Quote
DC & AC Power Systems

Marine Batteries, Lithium Upgrades, Inverters & Shore Power

Load testing, AGM/flooded battery swaps, full LiFePO4 lithium house-bank conversions, inverter/chargers, DC-to-DC alternator protection, and 30A/50A shore power repairs—cleanly wired at your slip or lift.

Marine technician inspecting and wiring multi-battery bank and DC cabling
Marine battery bank inspection, terminal cleaning, and clean DC cable routing.

Dependable Starting, House Banks & Shore Power Without Surprises at the Dock

Dead house banks at anchor, scorched 30-amp shore power inlets, overheated alternators, and mismatched chargers are among the most common reasons a weekend trip gets cut short. Modern boats pack more electronics, refrigeration, gyro stabilizers, and inverters than ever—putting real demands on battery capacity, cable sizing, and AC/DC protection.

Seacoast Detailing & Marine Services handles everything from straightforward group-24/27/31 cranking battery replacements to complete LiFePO4 lithium house-bank conversions with DC-to-DC chargers, smart shunts, inverter/chargers, and proper Class-T catastrophic fusing.

On the AC side, we inspect and replace pitted 30A and 50A shore power inlets, ELCI breakers, galvanic isolators, and multi-bank smart chargers so your vessel stays safe in Florida marinas.

Battery, Inverter & Shore Power Services

LiFePO4 Lithium House Bank Conversions

Designing safe lithium drops or custom banks with BMS integration, Class-T fuses, battery switches, and updated charge profiles.

DC-to-DC Chargers & Alternator Protection

Protecting outboard and diesel engine alternators from overheating when charging low-resistance lithium banks.

Marine Inverter & Inverter/Charger Installs

Sizing and installing pure-sine-wave inverters and combo inverter/chargers for running outlets, coffee makers, microwaves, or A/C off the grid.

Cranking, House & Thruster Battery Replacement

Load testing, terminal cleaning, tray/tie-down upgrades, and fresh AGM or flooded batteries matched to engine cranking specs.

30A / 50A Shore Power Inlets & Cord Repairs

Replacing heat-damaged inlets, smart-plug upgrades, transfer switches, polarity indicators, and AC main breaker panels.

Galvanic Isolators & Stray Current Checks

Installing galvanic isolators to help protect underwater props, shafts, drives, and zincs when plugged into marina shore power.

Engineered Cleanly for Florida Marinas & Cruisers

Marina slips at Harbortown, Marsh Landing, Queens Harbour, Camachee Cove, and St. Augustine Municipal Marina all expose shore inlets and battery trays to salt humidity. We crimp marine tinned lugs with adhesive-lined heat shrink, label circuits clearly, and verify charge voltages across every mode before leaving the dock.

Ready to pair lithium or inverter power with marine electrical work or generator service? Call or text (904) 815-8421.

Veteran-Owned, One-Call Marine Care — Mobile Anywhere in Florida

Need multiple trades knocked out in one visit? Pair this service with fiberglass & gelcoat restoration, engine service, 12V marine electrical, Garmin installs, or Monthly Care Plans—or schedule during your haul-out at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice.

  • Proper Class-T fusing, heavy-gauge marine cabling & heat-shrunk lugs
  • Alternator-safe DC-to-DC charging for lithium battery upgrades
  • 30A & 50A shore power inlet, smart-plug & charger troubleshooting
  • Load testing & battery swaps dockside across Florida
Frequently Asked Questions

Common Questions Before You Schedule

Not safely on most boats. Lithium batteries accept high charge current and disconnect abruptly when a BMS trips, which can overheat engine alternators or confuse old lead-acid chargers. We install DC-to-DC chargers, proper fusing, and compatible charging profiles so everything works safely.
Loose blade contacts, salt corrosion, or undersized wire inside the inlet creates high electrical resistance and heat—a serious fire risk. Replacing burnt inlets and cord ends promptly prevents panel or boat damage.
Yes. A galvanic isolator blocks low-voltage stray DC currents on the shore power safety ground, helping extend the life of sacrificial anodes, props, shafts, and lower units in wet slips.
Large pure-sine inverters paired with high-capacity lithium banks can run marine A/C units for hours, though total runtime depends on BTU draw and bank amp-hours. We help size realistic expectations before you buy.
Get Started

Tell Us About Your Boat. We’ll Handle the Rest.

Send your vessel details here, or call or text photos directly to (904) 815-8421 for the quickest turnaround.

Call or Text Photos

(904) 815-8421 — call or SMS

Hours

8:00 AM – 6:00 PM, 7 Days a Week

Mobile Florida Coverage & Haul-Outs

Fully mobile — St. Augustine, Ponte Vedra (Marsh Landing), Jacksonville (Harbortown & Queens Harbour), Palm Coast, Fernandina to Daytona & anywhere in Florida · Haul-outs at Camachee Yacht Yard

Request a Free Marine Quote

Tell us your boat size, where it sits in Florida, and what you need. No obligation.

Optional — Fastest Estimate: After submitting, or right now, text 2–3 photos of your hull, cockpit, or equipment to (904) 815-8421.
Call Text Photos Free Quote