Veteran-Owned & Operated Fully Mobile — St. Augustine, Ponte Vedra, Jacksonville, Palm Coast & Anywhere in Florida
Open 8:00 AM–6:00 PM, 7 Days seacoastdetail@gmail.com
Home All 32 Marine Services
Detailing, Fiberglass & Hull
Mechanical, Steering & Yard
Power, Batteries & Systems
Service Areas (Mobile FL)
About Seacoast FAQ Contact & Quote
Call (904) 815-8421 Text Boat Photos for a Quote
Boatyard & Hull Protection

Bottom Painting & Antifouling Prep in St. Augustine, FL

Full hull-bottom prep, sanding, barrier coating, and antifouling paint work coordinated during haul-out at Camachee Yacht Yard or the Florida boatyard of your choice—plus prop, shaft, and zinc service in the same yard stay.

Triple-outboard center console lifted in Travelift slings at boatyard
Triple-outboard center console suspended in Travelift slings during yard service.

Protect Wet-Slipped Boats in St. Augustine's Year-Round Fouling Waters

Unlike northern states where boats sit on the hard half the year, St. Augustine's warm coastal water promotes aggressive algae, hydroids, and barnacle growth all twelve months. Whether your vessel lives in a slip at Camachee Cove, Municipal Marina, Conch House, or a San Sebastian River dock, worn-out antifouling paint quickly turns into heavy drag and costly haul-out headaches.

Because Seacoast Detailing & Marine Services is available to haul out and work at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice, you do not have to split your haul-out between three separate contractors. While the boat is on blocks, we can handle bottom prep and antifouling paint alongside running gear, cutlass bearings, thru-hulls, underwater lights, and hull-side compounding.

What Goes Into a Proper Bottom Job

Haul-Out Pressure Wash & Inspection

Thorough washdown upon haul-out to expose flaking paint, blisters, old transducer fairing blocks, and zinc condition.

Scraping, Sanding & Feathering

Mechanical sanding and feathering of peeling bottom paint so fresh coats adhere evenly without flaking.

Epoxy Barrier Coat (When Needed)

Interprotect-style epoxy barrier coats for bare gelcoat hulls or repaired spots to help block osmotic blistering.

Ablative or Hard Antifouling Paint

Matching paint type (multi-season ablative for cruising boats vs. hard modified-epoxy for faster hulls) to how you run.

Running Gear & Metal Prep

Prepping bronze props, shafts, struts, rudders, and trim tabs with appropriate metal primer/foul-release coating and fresh zincs.

Waterline Masking & Boot Stripe Cleanup

Crisp waterline taping and optional hull-side buffing and waxing before the Travelift splashes the boat.

Combine Bottom Work With Mechanical & Cosmetic Service in One Haul-Out

Haul-out fees add up when you pull a boat twice. When your boat is blocked at Camachee Yacht Yard or the Florida boatyard of your choice for bottom painting, it is the smartest window to replace a worn cutlass bearing, service a dripless shaft seal, install underwater LEDs, mount a thru-hull transducer, or compound the hull sides below the rub rail.

Call (904) 815-8421 ahead of your planned haul-out date so we can align with the yard schedule, verify your hull length and current bottom coating type, and give you a clear estimate.

Veteran-Owned, One-Call Marine Care — Mobile Anywhere in Florida

Need multiple trades knocked out in one visit? Pair this service with fiberglass & gelcoat restoration, engine service, 12V marine electrical, Garmin installs, or Monthly Care Plans—or schedule during your haul-out at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice.

  • Approved & insured to work at Camachee Yacht Yard or the Florida boatyard of your choice
  • Barrier coats, ablative & hard antifouling bottom paints
  • Metal foul-release prep on trim tabs, shafts & struts
  • Bundle with cutlass bearings, shaft seals, zincs & hull buffing
Frequently Asked Questions

Common Questions Before You Schedule

Yes. We are available to haul out and work at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice, and we coordinate directly with your haul-out timing.
Boats that run regularly or sit in active tidal currents often do well with multi-season ablative paint that wears away cleanly without thick buildup. High-speed boats or boats scrubbed often may prefer hard antifouling. We help match the coating to your boat and usage.
Yes. Unpainted gelcoat must be dewaxed, etched/sanded properly, and ideally sealed with an epoxy barrier coat before applying antifouling paint.
Check cutlass bearings, shaft alignment, dripless seals, seacocks, thru-hull strainers (including our side-hull A/C diverter upgrade), sacrificial zincs, and hull-side compounding.
Get Started

Tell Us About Your Boat. We’ll Handle the Rest.

Send your vessel details here, or call or text photos directly to (904) 815-8421 for the quickest turnaround.

Call or Text Photos

(904) 815-8421 — call or SMS

Hours

8:00 AM – 6:00 PM, 7 Days a Week

Mobile Florida Coverage & Haul-Outs

Fully mobile — St. Augustine, Ponte Vedra (Marsh Landing), Jacksonville (Harbortown & Queens Harbour), Palm Coast, Fernandina to Daytona & anywhere in Florida · Haul-outs at Camachee Yacht Yard

Request a Free Marine Quote

Tell us your boat size, where it sits in Florida, and what you need. No obligation.

Optional — Fastest Estimate: After submitting, or right now, text 2–3 photos of your hull, cockpit, or equipment to (904) 815-8421.
Call Text Photos Free Quote