Veteran-Owned & Operated Fully Mobile — St. Augustine, Ponte Vedra, Jacksonville, Palm Coast & Anywhere in Florida
Open 8:00 AM–6:00 PM, 7 Days seacoastdetail@gmail.com
Home All 32 Marine Services
Detailing, Fiberglass & Hull
Mechanical, Steering & Yard
Power, Batteries & Systems
Service Areas (Mobile FL)
About Seacoast FAQ Contact & Quote
Call (904) 815-8421 Text Boat Photos for a Quote
Structural & Surface Restoration

Fiberglass & Gelcoat Repair & Restoration

Structural fiberglass repair, dock rash & gouge rebuilding, stress-crack remediation, transom and deck work, blister repair, non-skid deck restoration, and custom color-matched gelcoat finishing—mobile dockside across Florida or on blocks at Camachee Yacht Yard.

Commercial vessel with freshly restored turquoise non-skid fiberglass cockpit deck and white seating at marina dock
Completed turquoise non-skid fiberglass deck and cockpit restoration at the dock.

Complete Fiberglass Structural Repairs & Color-Matched Gelcoat Restoration

Tight marina slips, shifting wakes along the Intracoastal Waterway, dropped anchors, and trailer bunk impacts inevitably take a toll on marine fiberglass and gelcoat. Even small rub-rail scrapes, chipped chines, or spider cracks around cleats and T-top bases can expose bare laminate to Florida saltwater—allowing moisture to wick into deck coring, transoms, or stringers over time.

Seacoast Detailing & Marine Services handles the full spectrum of fiberglass and gelcoat repair and restoration. From above-the-waterline dock rash, old electronics cutout glassing, and patterned non-skid cockpit deck refinishing at your slip or driveway, to below-the-waterline hull gouges, transom repairs, and osmotic blister remediation while hauled out at Camachee Yacht Yard or the Florida boatyard of your choice, we rebuild the structure properly and finish it to blend cleanly.

After structural glasswork and custom pigment tinting, every repair is faired, progressive wet-sanded, compounded, and machine-polished so the restored area matches surrounding gelcoat sheen and color—not a chalky, mismatched patch.

Fiberglass & Gelcoat Repair & Restoration Services

Dock Rash, Chips, Scratches & Hull Gouges

Grinding damaged laminate, rebuilding with marine structural fiberglass and resin, and laying color-matched gelcoat on hull sides, bows, chines, and keels.

Stress Cracks & Spider Crazing Repair

V-grooving and stabilizing hairline gelcoat stress cracks around cleats, stanchions, rod holders, T-top feet, and console flanges so cracks stay sealed.

Custom Gelcoat Color Matching & Polishing

On-site pigment tinting to match sun-aged white or colored hulls, followed by progressive wet-sanding and rotary/DA polishing for seamless blending.

Transom, Deck & Structural Fiberglass Repair

Core and laminate repairs for soft deck sections, transom damage, hatch frames, stringer tie-ins, and heavy impact fractures.

Non-Skid Deck Repair & Full Cockpit Restoration

Spot-matched patterned non-skid repairs after hardware moves or full cockpit non-skid deck prepping, masking, and refinishing for safe footing.

Osmotic Blister Repair & Barrier Coating

Grinding, drying, fairing, and epoxy barrier-coating hull-bottom blisters during haul-outs at Camachee Yacht Yard in St. Augustine or any Florida yard.

Old Electronics, Transducer & Hardware Hole Fill

Beveling, fiberglass backing/glassing, and gelcoating abandoned MFD cutouts, stereo holes, thru-hulls, or cleat mounts cleanly.

Full Gelcoat Restoration & Oxidation Recovery

Combining structural spot repairs with multi-stage compounding, high-gloss polishing, and ceramic or wax sealing across the entire hull.

Dockside Across Florida or Hauled Out at Camachee Yacht Yard

Most above-waterline fiberglass and gelcoat repairs—gunwale dings, cockpit deck restoration, console dash glassing, hatch repairs, and non-skid refinishing—are performed mobile right at your slip, lift, or driveway across St. Augustine, Ponte Vedra, Jacksonville, Palm Coast, Daytona Beach, and anywhere in Florida.

When damage sits below the waterline or requires hull-bottom blister work, keel repairs, or full transom access on blocks, we coordinate haul-outs at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice—and pair your fiberglass work with bottom painting or hull-side ceramic coating in one stay.

Text 2–3 clear photos of the damage (one close-up in good light and one stepped back to show panel color and location) to (904) 815-8421 for an honest repair plan.

Veteran-Owned, One-Call Marine Care — Mobile Anywhere in Florida

Need multiple trades knocked out in one visit? Pair this service with fiberglass & gelcoat restoration, engine service, 12V marine electrical, Garmin installs, or Monthly Care Plans—or schedule during your haul-out at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice.

  • Structural marine fiberglass & resin repairs—never cheap surface body filler below the waterline
  • Custom gelcoat tinting, wet-sanding & polishing for faded or colored hulls
  • Deck, transom, stress-crack, blister & patterned non-skid restoration
  • Mobile anywhere in Florida above the waterline, or on blocks at Camachee Yacht Yard
Frequently Asked Questions

Common Questions Before You Schedule

Yes. Sun and salt shift gelcoat shade over time, so straight out-of-the-can white almost always stands out. We custom-tint gelcoat on-site to match your hull's current shade before wet-sanding and buffing it flush.
Most above-the-waterline work—dock rash, gunwale chips, stress cracks, cockpit non-skid restoration, and console cutouts—can be done mobile right at your marina slip, lift, or driveway in dry weather. Below-the-waterline structural repairs and blister work belong on blocks at Camachee Yacht Yard or your chosen boatyard.
Yes. We grind out compromised laminate or wet core, rebuild with structural fiberglass, fair the surface, and seal below-waterline repairs with epoxy barrier coats before bottom paint.
Yes. We replicate diamond or molded non-skid textures for localized repairs and also perform full deck prep, masking, and marine non-skid refinishing across entire cockpits.
Always repair fiberglass and gelcoat first, then complete multi-stage oxidation removal, polishing, and wax or ceramic protection so the entire hull finishes evenly.
Get Started

Tell Us About Your Boat. We’ll Handle the Rest.

Send your vessel details here, or call or text photos directly to (904) 815-8421 for the quickest turnaround.

Call or Text Photos

(904) 815-8421 — call or SMS

Hours

8:00 AM – 6:00 PM, 7 Days a Week

Mobile Florida Coverage & Haul-Outs

Fully mobile — St. Augustine, Ponte Vedra (Marsh Landing), Jacksonville (Harbortown & Queens Harbour), Palm Coast, Fernandina to Daytona & anywhere in Florida · Haul-outs at Camachee Yacht Yard

Request a Free Marine Quote

Tell us your boat size, where it sits in Florida, and what you need. No obligation.

Optional — Fastest Estimate: After submitting, or right now, text 2–3 photos of your hull, cockpit, or equipment to (904) 815-8421.
Call Text Photos Free Quote