Veteran-Owned & Operated Fully Mobile — St. Augustine, Ponte Vedra, Jacksonville, Palm Coast & Anywhere in Florida
Open 8:00 AM–6:00 PM, 7 Days seacoastdetail@gmail.com
Home All 32 Marine Services
Detailing, Fiberglass & Hull
Mechanical, Steering & Yard
Power, Batteries & Systems
Service Areas (Mobile FL)
About Seacoast FAQ Contact & Quote
Call (904) 815-8421 Text Boat Photos for a Quote
Propulsion & Running Gear

Inboard & Sterndrive Repair in St. Augustine, FL

Mobile and boatyard service for gas and diesel inboards, MerCruiser and Volvo Penta sterndrives, marine transmissions, propeller shafts, cutlass bearings, struts, and dripless shaft seals.

New fluted rubber cutlass bearing seated inside bronze propeller shaft strut on yard blocks
Fresh fluted cutlass bearing installed inside bronze strut while on blocks in the boatyard.

Reliable Propulsion & Underbody Running Gear Care—In the Slip or on Blocks

Express cruisers, bowriders, downeasts, and sportfishing boats around St. Augustine rely on inboard shafts or sterndrive outdrives that live in harsh saltwater year-round. A weeping shaft log, worn cutlass bearing, corroded exhaust riser, or torn outdrive bellows does not stay small for long.

Seacoast Detailing & Marine Services handles both dockside inboard/sterndrive diagnostics and full underbody running-gear work at Camachee Yacht Yard or the Florida boatyard of your choice—eliminating the gap between slip-side mechanics and yard-only trades.

Inboard, Sterndrive & Running Gear Scope

Shafts, Struts, Cutlass Bearings & Rudders

Diagnosing shaft vibration, pressing new fluted cutlass bearings, inspecting struts and rudder packing, and checking alignment.

Dripless Shaft Seals & Traditional Stuffing Boxes

Replacing PSS/Tides-style dripless shaft seals, cooling feed lines, or repacking traditional flax stuffing boxes.

Sterndrive Service (MerCruiser & Volvo Penta)

Outdrive fluid changes, gimbal bearings, U-joints, bellows inspections, anodes, and trim rams during haul-out or on trailer.

Inboard Cooling, Risers & Raw-Water Pumps

Manifolds, risers, thermostats, circulating pumps, raw-water impellers, and heat-exchanger cleaning.

Marine Transmissions & Shift Cables

Fluid/filter changes, transmission cooler lines, linkage adjustments, and damper-plate/coupling checks.

Engine Room Cleanup & Corrosion Control

Degreasing bilges, dressing belts/hoses, and replacing sacrificial anodes so problems stay visible early.

Seamless Transition From Slip Diagnostics to Camachee Yacht Yard or the Florida boatyard of your choice

Many inboard checks—cooling flow, belt tension, transmission fluid, starter/alternator diagnostics, and alignment inspections—start right at your marina slip. When a job requires lifting the hull for a cutlass bearing, dripless seal, or sterndrive bellows, we are already licensed and insured to finish it at Camachee Yacht Yard or the Florida boatyard of your choice.

Call (904) 815-8421 or text photos of your engine bay or running gear to get a straightforward assessment.

Veteran-Owned, One-Call Marine Care — Mobile Anywhere in Florida

Need multiple trades knocked out in one visit? Pair this service with fiberglass & gelcoat restoration, engine service, 12V marine electrical, Garmin installs, or Monthly Care Plans—or schedule during your haul-out at Camachee Yacht Yard in St. Augustine or the Florida boatyard of your choice.

  • Dockside mechanical diagnostics plus Camachee Yacht Yard & Florida boatyard haul-out support
  • Cutlass bearings, shafts, struts, rudders & dripless shaft seals
  • Gas & diesel inboards plus MerCruiser / Volvo sterndrives
  • One team for mechanical repair and engine room detailing
Frequently Asked Questions

Common Questions Before You Schedule

Common signs include noticeable driveline vibration under load, clunking when shifting or spinning the prop by hand on blocks, or visible play between the shaft and bronze strut.
Yes. Replacing a leaking or aging dripless shaft seal requires hauling out at a yard like Camachee Yacht Yard, where we handle the pull, seal swap, and shaft coupling reassembly.
Yes. We service sterndrive gear lube, bellows, gimbal bearings, anodes, cooling systems, and trim components on trailer boats or hauled vessels.
Yes—keeping the engine room clean makes spotting oil, coolant, or raw-water leaks fast and easy.
Get Started

Tell Us About Your Boat. We’ll Handle the Rest.

Send your vessel details here, or call or text photos directly to (904) 815-8421 for the quickest turnaround.

Call or Text Photos

(904) 815-8421 — call or SMS

Hours

8:00 AM – 6:00 PM, 7 Days a Week

Mobile Florida Coverage & Haul-Outs

Fully mobile — St. Augustine, Ponte Vedra (Marsh Landing), Jacksonville (Harbortown & Queens Harbour), Palm Coast, Fernandina to Daytona & anywhere in Florida · Haul-outs at Camachee Yacht Yard

Request a Free Marine Quote

Tell us your boat size, where it sits in Florida, and what you need. No obligation.

Optional — Fastest Estimate: After submitting, or right now, text 2–3 photos of your hull, cockpit, or equipment to (904) 815-8421.
Call Text Photos Free Quote